FT1211 Enhanced Aeroquip Dogleg Assembly Machine

FT1211 Enhanced Dogleg Assembly Machine

• Manufactured for Eaton Aeroquip by Lomar Machine & Tool.  
• New Enhanced Design with 2-speed Transmission.  
• Part number FT1211-LM-2-4.

The FT1211 Dogleg Assembly Machine is designed to assemble most Aeroquip industrial and marine screw together reusable fittings. It will accomodate straight and elbow fittings including dogleg fittings ranging from 1/4 inch to 3 inch. The FT1211 Enhanced version is new in 2016 and includes the following:

• Electrical Requirement 230/460 Volt, 3-Phase power
• Chain driven, (same as legacy FT1211-2-4 Machine)
• Safety interlock switch on large guard assembly
• 2-speed transmission with detente neutral position
• Output speeds at the spindle
• 1^st gear RPM output to be 14.9 with a minimum of 540 foot pounds of torque available at spindle
• 2^nd gear TPM output to be 29.8 with a minimum of 265 foot pounds of torque available at spindle
• Baldor 2.0 HP/1725 RPM motor with electric brake
• (2)  FT1211-200-1 Flat inserts
• (2)  FT1211-100-1 Large Insert
• (1)  FT1211-150-1 Large cutaway insert
• (2)  FT1211-100-2 Small insert at full length
• (2)  FT1211-150-2 Small cutaway insert
• Operator Manual
• Spindle thru-hole:  9.75”
• Compatible with existing tools designed for use with FT1028 & FT1211-2-4 machines

Available Options Include:

• FT1211-2-1 Potchuck 
• FT1211-2-2 Overriding Head & Brake Assembly
• FT1211-2-3 Face Plate (for captive flange fittings)