Product Description
- pumps are ideal for dewatering constructions sites, mines, or for all around use in industrial plants and utilities.
- Top Discharge – allows for superior cooling of motor and provides a slim line design.
- Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
- 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
- Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic*. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
- Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components*.
Specifications for the R1500-230
- Rated: 2HP
- RPM: 3450
- Voltage: 230, 1PH-60HZ
- Motor Protection: Thermal & Amp Overload
- Power Cord: AWG 14/3; 50 ft.
- Max Liquid Temp: 104 deg.
- Max Flow GPM: 116
- Max Head Ft: 71 ft.
- Pump type: Top Discharge, Dewatering
- Strainer Opening: .25"
- Discharge size: 2" NPT-M
- Max Submerge Depth: 65 ft.
- Motor Casing: 304 SS
- Pump Volute: Cast Iron
- Impeller, Multi-vane: Cast Iron
- Lip Seals & O-Rings: Buna
- Rotor Shaft & External Hardware: 304 SS
Product Reviews
